Mazda Protege: 76'016 Products

$60.49
Buy It Now
$66.99
Mazda : Protege MazdaSpeed Protege Si Turbo
Protege
Best Offer Enabled
$5,900.00
$5,500.00
$80.00
Buy It Now
$88.00
$122.94
$80.00
Buy It Now
$88.00
$125.99
$83.50
$80.00
Buy It Now
$88.00
$4,500.00
$60.49
$63.58
via eBay

Mazda Protege's

Couple of mazda's from Canada

via YouTube

Mazda Protege Breaking News

West Shore Regional police investigate theft of running car in Lemoyne - PennLive.com December 10, 2009

When she came back out, she saw her her 2001 Mazda Protege being driven out of the parking lot, turning left toward New Cumberland. The car is a tan,

Upgrade original tires to boost performance - Globe and Mail December 04, 2009

Upgrade original tires to boost performance Mazda Protege compact sedan was redesigned for 1999 to add safety features, including crash-resistant H-shaped frames and three-point safety belts.

Frosty road leads to rollover near Ashby - Alexandria Echo Press December 02, 2009

Julie A. Peterson was driving a 1996 Mazda Protégé on Highway 78 about four miles north of Ashby in Grant County when she lost control on the frost-covered and more »

A biking experiment in progress - Rutland Herald December 06, 2009

We own a car, a 2000 Mazda Protege, but we stopped using it at the end of August and don't plan to use it again until mid-December.

Pizza delivery man robbed, carjacked - CharlotteObserver.com February 09, 2405

The stolen car is described as a black 1999 Mazda Protege, with NC license tag YYP-8752. Anyone with information in the case is asked to call Crime Stoppers and more »

via Google News

Father and son seriously injured in crash near Lincoln City

Troopers said Dominick Hindman, 25, of Lincoln City was driving his 1995 Mazda Protege when he swerved off Highway 18 and hit the tree near the Highway 101 junction. Oregon State Police said two men were seriously hurt when their car swerved off the highway and hit a tree near Lincoln City on Monday afternoon. Investigators said Dominick and his father Larry, who was riding in the passenger seat, were seriously injured in the crash. Troopers said the crash remains under investigation. Investigators said everyone in the car was wearing their seatbelt.

You Ask We Answer

Q:

Where are the fusible links in a 93 Mazda Protege?

I have electrical issues with a 93 Mazda Protege DX, and I need to track down the fusible links to see if they're blown or not. A diagram or schematic would be most helpful but anything counts.
I do have a Haynes book, and that's sort've an Issue! There is no legend to the diagram and I'm not an electronic guru. I'm the diagrams I figured X-01 was a fusible link, can anyone confirm the legend for the link on the diagrams?
(asked by Larry H on December 15, 2007)

A: I would suggest following cables from the positive battery cable, and checking along there. Sometimes fuse-links are easy to overlook because they look just like regular old wires, and when you find them, don't just look at them, even if they don't look burnt or bubbled, pull on them slightly, wires won't give, but a fuse-link that has burn the wire inside but no the insulation will. (answered by scottcollins83 on December 15, 2007)

Q:

How to get a 94 mazda protege to pass smog?

I have a mint condition 94 Mazda protege that has high nox #'s but no EGR valve to change Could it be the Cat converter?
(asked by big daddy on May 01, 2009)

A: It could be. The first (cheaper) alternative is a coolant flush. That will bring the engine temperature down; NOx is caused by high temperatures and pressures fusing nitrogen in the air with oxygen. My NOx readings went from 1700 to below 100 after a very thorough coolant flush.

The more expensive solution (if flush fails) will be to replace the 3-way catalytic converter. The rhodium catalyst (the one that converts NOx back to N2 and O2) is the first catalyst to get clogged with engine soot. (answered by gbreadmann on May 03, 2009)

Q:

How do you remove and replace front wheel berrings on a 97 Mazda Protege?

I need to know in detail How to remove and replace front wheel berrings on a 97 Mazda Protege?
(asked by calgrl1j on November 15, 2007)

A: you dont need any shop press to remove the bearing, it would help but not neccesary, you can take it out with a hammer

first need 21mm socket to remove the wheel nuts
remove the pilot bearing (cv joint nut) 32mm socket
then remove 2 bolts from the shock (17mm socket and wrench too)
1 bolt for the tie rod end 17mm
2 bolts for the ball joint 17mm or 14mm not sure
now you can pull out the whole spindle, with the spindle out of the car then with the hammer strike the center part hard enough so the inner part of the spindle will come out, (strike it for the side of the cv joint)
once the inner part is out with a snap ring tool take out the snap ring and then strike again with the hammer and flat screw driver for the oposite site (strike from the side was supose to be the tire on the spindle so the bearing will came out)

now you have to put the new bearing and everything in place again the same way you do to take it out (answered by MazdaTech_PR on November 15, 2007)

via Yahoo Answers