Mazda Rx7 Engine Breaking News
Mazda reaches a milestone - OCRegister December 08, 2009
The RX-7 sports car of the mid-90s is one of the most beloved Mazda vehicles among sports enthusiasts. The two-seater featured a rotary engine. and more »
Mazda's RX-7 to return - AutoExpress November 24, 2009
Mazda's RX-7 to returnThese illustrations are the best yet of the forthcoming RX-7– an all-new two-seater sports car, complete with a turbocharged rotary engine.
Rotary Keeps Spinning, May Find its Way into a New RX-7 or RX-8 - Car and Driver December 08, 2009
Ever since Mazda introduced its ambitious Sky G gasoline and Sky D diesel engines at the 2009 Tokyo auto show, things have been looking, uh, up.
1974 Mazda RX-4 - Vintage Veteran - Import Tuner Magazine November 26, 2009
In the engine bay, Juni dropped a 13B rotory from an '85 Mazda RX-7. It was sheer coincidence and pure convenience that he went for that model engine,
24 Hours Of LeMons At Thunderhill Raceway: Prologue and Prepday - MotorTrend Magazine November 22, 2009
first-generation Mazda Miatas, and first-generation Mazda RX-7?, all of which are cheap enough to meet the LeMons cost limit while being quick and agile and more »
Cars like the Nissan Primera, Toyota Corolla were hardly sexy but what about Mazda's RX7, RX8 the current 2, 3 and the 6 or models like the Honda CRX , early nineties Prelude, NSX, Nissan Z cars. By PinkyBow I like it but has the Skyactiv diesels cured the dreaded DPF problem with the old diesel. For those without a clue to what I am referring, then just visit a Mazda owners forum. they completely blend in to the scenery and are completely tedious.
Q:
can you install a blow off valve on a stock 93 mazda rx7 engine?
i wanted to know if its possible to just buy a bov and install it onto a stock 93
mazda rx7 engine without addind tubes,...
and if u can buy
headers for a rotary engine??
if u can where can i buy it?
(asked by ricardo g on February 11, 6019)
A: Yes you can get and install an aftermarket BOV, your best bet is to go ahead and replace both BOV's if you are already going to replace one.
As far as headers go, stay away from aftermarket headers, the stock headers for the RX-7 are already good, the best option is to go with a new exhaust system, i.e. High Flow Cats, with a new cat back exhaust.
Some places to check out
http://www.rx7club.com
http://www.rx7store.net/ (answered by on February 11, 7338)
A: If your RX7 had a factory
turbo, it has a BOV installed already.
Try going to the RX7club site. They can help more then anyone here has time to write or even think of in such a short space as provide.
(answered by Old Man Dirt on February 11, 6919)
Q:
What do I need to do to swap a 1987 Mazda RX7 with a 3rd Gen RX7 engine?
I own a 1987
Mazda RX7 and bought the 3rd Gen 13BTT engine to drop into it. Has anyone done this yet that can give me some tips on what will have to be done to accomidate the new engine. I do have both the engine and tranny and some parts other than that that are ready to be dropped in but still trying to work out with the 87 body.
(asked by mudvayne_1_5 on June 15, 2007)
A: oh man they make
mazada frankenstein cars too
not just b16s and hondas anymore (answered by man_with_koolaid_smile on June 16, 2007)
A: i do alot of motor swaps,and u will need the wire harness ,and computer with relays
(answered by ted s on June 15, 2007)
Q:
Can I change my 1979 Mazda Rx7's engine to a 13b rotary? and how much will in cost?
I have a 1987 Rx7.. some of my friends call it the rx7 fb..
I have problems with my current engine it's also a rotary but
its not powerful and it produces lots of white smoke.
I guess there is something wrong with the engine cause it bruning engine oil! I was wondering could I change it to a 13b which is more powerful and can it fit in the fb... and how much will it cost for a 13b engine? and the price to get it all fix..
(asked by hitsugaya h on September 29, 2007)
A: The 13B from the 86-on cars does not fit in the 79-85 cars unless you are prepared to make MAJOR modifications tot he subframe and body. You need the 13B carb engine from a 71-75 model (RX-3 if I recall) which are going to be very hard to find in good running order these days. The other option is the 13B out of a 84-85 GSL-SE model which is fuel injected. Of course you will need the entire harness with it. While you are at it you could take the front suspension and rear axle which has the advantage of better brakes and a limited slip differential. (answered by Mark F on September 29, 2007)
Ada Lubbock says:
Aura Mchattie says:
JDM-Ottawa.com says:
Keshia Hemminger says:
Tynisha Ackiss says:
